DIY Electric List of Skeitbord Parts and a Purchase Guide Detailed

Electric skateboards are becoming popular. Young people use them at a college campus and move on to the neighborhood. You can buy electric skaters from several different brands or you can build your board.

The value of money is not a comparison regarding the differences between pre -built and DIY electric skateboard. Within your budget you can get a much better parts to build an electric skateboard and personalize it according to your requirements.

A little brand of skateboard cover the complete ecosystem of the upgrade. Most of the time you cannot change the battery or ESC from pre -built skaters. There is only a wheel change option, but it won’t make you use an electric skateboard as a pro.

Suppose you have graduated from college and want to have higher speed on an electric skateboard to get to your job on time, and then you will buy another skateboard with higher speed? Well, that will take a lot of money to spend. It is a better option to build an electric skateboard and upgrade it when necessary.

In addition, when you build a skateboard, you know how to fix it. You know about his parts and their work. When you build an electric skateboard, you can replace any part, which is the beauty of the DIY electric parts of the skateboard.

Now I will give you knowledge and at least the tip of the iceberg for what you will need to build an electric skateboard. It is easy to build a skateboard with the following parts.

Mechanical parts

• Electric motor and motor carrier
• Train accessories
• An extra belt

Electric parts

• Electric speed regulator
• Battery management system and battery
• Remote receiver
• Charging adapter
• Wires
• Charger

Other parts

• Deck
• Tape
• Trucks
• Wheels
• Beds
• Pads

The internet is full of DIY electric parts of the skateboard. Authenticity goes with reliable websites. You can buy DIY parts for electric skateboard from Amazon and Eovan Board. These websites are best evaluated in providing consumer satisfaction through the best products.

1) an electric engine and a carrier

The most exciting part of the electric skateboard is his engine. The engine decides how quickly the Skeitboard will go. The engine is a cylindrical with a silver axle that goes out to one end to put the attachment strap on the belt that will eventually run the wheel. I recommend you have Eovan Electric Skateboard 6374 engines . These engines are best rated on the website.

Three -phase wires come out of the back and sometimes the wires of the sensor. It would be best if you had an engine with a clamp. The clamp is made for a truck caliber for the nature of the shape. Does not slide or slide. You will connect the engine carrier to the clamp.

I also suggest you buy Eovan Maroon Motor Carrier. Then connect the engine with a few screws. The engine stays there below your board. You have to somehow catch the energy of a moving engine. Usually do this by turning your pulley right over the drive shaft, then take the belt and transfer it to another strap on your wheel.

2) Plated train kit

The drive train kit should maintain all the parts that are combined. The electric drive for the skateboard is made of 6 elements. Motor pulley, wheel belt, belt drive engine, wheel and battery.

All 6 things work together to make the drive train or propulsion system that operate at a speed that is useful to people. There are 5 variables you have to decide to get the results you want; Transfer reduction ratio, KV engine, battery voltage, wheel diameter and desired maximum speed.

You can adjust the drive train to get exactly what speed you want. You can buy Eovan set of gear drive drives To achieve optimal speed on an electric skateboard.

Skateboard becomes functional with its belts. It would help if you were tightening it from time to time. Sometimes one belt could feel a little different, firmer or loose, and you feel like you adjust it. You can replace the belt if you have additional in accessories. You can buy your DIY electric sections of the skateboard.

4) Electronic speed regulator

It would help if you have something in between to control how much power goes from your battery to your engine. It is an electronic speed controller. I recommend you have Eovan Electric Skateboard Generation II speed controller It comes with a remote control.

5) Electric Battery for Skeitbord and BMS

It would be helpful if you had a top -notch battery with enough amperation and voltage to push the person forward. You can take Eovan Electric Skateboard Battery. There are a lot of range, which is a quick battery. It will be connected straight to the engine. This battery package contains 4800MAh 21700 fatty cells that have a significant capacity. Depending on the engine and other parts of the skateboard, it can go up to 30 to 60 KM.

6) Remote receiver

Skeitbord’s remote receptions are good when you need to adjust the speed. Some remote controls have screens showing notifications. It will show the battery light and let you know when it dies. Eovan GTS Super remote is the best thing to buy for your electric skateboard. Has a power button and the installation button. You can move the remote control wheel to speed up or brake skateboard.

7) Adapter to charge

Eovan Electric Skateboard Fast Charger Provides 50.4V and 5A power supply to ideally fill the electric skateboard. It needs an entrance of 100-240V 50/60 Hz.

8) Luke for a charger

You can use Becaususestrong replacement for Skeitbod charger Because it is made of high quality copper core and can be used in all skaters. It is easy to fill that works well for DIY electric skaters.

9) Sketeboard deck

To create an electric skateboard, you can build it with the old deck giving it a new shape and prospects. You can use brushed transformation paper in a new crusade -style deck. Fortunately, you can buy a budget cover of an electric skateboard deck, Eovan GTS carbon Super electric skateboard.

The deck cover can be mounted on a wooden deck of your choice. You need to use a reliable and solid wood that can take your weight load and quickly put you forward.

10) Grip tape

Eovan Electric Skateboard Grip Tibbling It can be the perfect option for the aesthetics of your skateboard. Try to paste it with a lot of worries, as there can be bubbles on the curve. You must gradually glue it from side to side. After gluing the ribbon, reduce the extra part on the side and make them smooth. Lastly, make holes the same as on the deck to repair the wheels.

11) Skeitbord wheel

There are 3 main characteristics of a skateboard wheel. Hardness, size and shape. When you choose the wheel for your skateboard, the most important thing you need to consider is what kind of skating you want to do. With that in mind, decide the hardness of the wheel.

There are hard wheels and soft wheels. If you want to make tricks on the skateboard, get hard wheels. They are slippery and give you a shift, turns and restore tricks. If transportation is your main concern, go with soft wheels. They are unrivaled for fast and smooth trips all over the city.

They can be worn with a rough roadway and roll right through the debris on the ground. Larger wheels maintain your speed and are easier to roll over a rough roadway, even with hard wheels. Smaller wheels lose speed faster than large wheels.

The shape of the wheel depends on the contact patches, lip and side wall. The wider contact patch will be firmly attracted. Here’s my recommendation Eovan GTS Super RS125 without air rubber wheelwith.

12) Electric skateboard truck

An electric skateboard is part of an electric skateboard that needs to be connected to a deck with some screws. The truck has a hanger; At both ends of the hanger there are shafts for repairing wheels. Eovan Electric Skateboard Generation II DKP trucks are more stable and more robust. These trucks have a single -layer base, so it’s easy to slide over them.

13) wheel bearings

Skeitborada trucks have small washers there. You can also buy additional bearings to create an electric skateboard. The bearings are tightened wheel. The bearings have external and inner rings and balls on the racing track. Bones of Red Beds Skeitbodbod 8 packs It is suitable for the DIY electric parts of the skateboard.

14) lift pads

On the skateboard you have few areas where your wheels tend to touch and the wheels touch the bottom of the skateboard. They stop riding you. The level pads go between your trucks and panels. They should prevent the wheel bite. Growing pads are explicitly used for larger wheels. You can get sharp bandages without a wheel snack. You can perform different tricks on your skateboard while using Bone skating pads.

1) Deck preparation

Your Skeytbord deck is the first thing to be observed. You need to consider three things before you get a deck for your electric skateboard. Inter -elementary, flexibility and shape. You can take a wooden piece of 7-lane in shape.

Kicktail can be made for easy lift panel. There must be an adequate distance between the intermediate space to the installation of electrical components. It also determines how big the battery will be. The thinner the deck or smaller layers of the layer, the more flexible the deck will be.

2) Mount the engine and battery

The motor carrier is crucial for each DIY electric skateboard with engines guided by a belt. A motor carrier helps to place the engine on a truck. This gives the ability to move the board forward. It must have a great weight and can stand with a lot of torque. If your motor carrier is not firm, it can mess up many different things.

Move the engine carrier to the truck shaft and tighten the clamp around the truck. Now attach the engine to the bracket using screws. Now fix the belt and attach the wheels. You must have enough room to repair the battery housing on a skateboard. You have to do a little bit of a battery closure, but it should be a governing distance.

Grab the battery gasket and throw out all the little fillers with a hole. Discover the bolt holes and lay the gasket where you want to install the railway. Mark the holes on the deck and drill these holes. Install the battery in the perfect place and tighten the screws. Connect the wires to the engine.

3) Installation of other parts

Once the electronic parts are installed, you need to add the filling connection to the charter and other parts to the skateboard. Before attaching a truck of the wheel use a riser pads for security. This is a point where you need to be satisfied with all the installation of parts. If you feel something confusing, then repair it again. Check the belts and screws properly.

Finally, your electric skateboard is ready to use. You can adjust your board by applying a strap and stickers. It will look phenomenal, and you will enjoy driving on your personalized electric skateboard.